Equisys technical notes

Technical guidance, explanations and fixes for our products

PRB: Only the first page of a fax is sent when using Eicon SoftIP H.323



ID: ZTN1584

This Zetafax technical note applies to:

  • Zetafax v2006 SP1 and later
  • Eicon Soft-IP H.323


The remote recipient receives only the first page, or part of the first page a multipage fax when using Eicon Soft-IP H.323.


Currently, the Zetafax Eicon Soft-IP integration does not support the Modified Read (MR) compression method.


The workaround requires MR to be disabled in the Soft-IP configuration (Modified Huffman and Modified Read are supported).

  1. Open the configuration program from Start | Programs | SoftIP | SoftIP Configuration.
  2. Navigate down to the T.30 - UDP (see screenshot below).
  3. Uncheck the box - "Modified Read (MR)".
  4. Save and close the configuration screen.
  5. Restart Zetafax Server to re-initialise the CAPI devices.


This has been identified by Equisys as a problem with the software versions given above.

Last updated: 17 May 2007 (JW/PJ)

Keywords: < Soft IP> < eicon>


Recent news

It’s that time of year again. Directions EMEA is right around the corner. This year, it takes place at the Austria Center in Vienna, between 9-11 October. Traditionally, Directions NA would take ...

We are delighted to announce that the Zetadocs Delivery and Zetadocs Capture Extension for Business Central is now available on AppSource, the app store for Business Central. This is an ...