FIX: Faxes are sent with a blank fax number on header line or station ID
This Zetafax technical note applies to:
- Zetafax server 220.127.116.11
- Active CAPI ISDN controller cards.
Note: The fax number on the header line of a received fax is sometimes referred to as the 'Station ID'
When using a CAPI ISDN device to send faxes, recipients report that faxes sent by Zetafax do not have the fax number on the header of each page sent, or the station ID is not recoered correctly in received fax reports as specified in the 'Fax number on header line' option within Zetafax 'Device options' configuration.
With previous versions the CAPI device controller for Zetafax did not submit this information to the CAPI sub-system.
Equisys has provided an updated version of the CAPI device controller (ZFDevCP_75192.exe) which does provide the CAPI sub-system with the information entered in the 'Fax number on header line' option within Zetafax configuration. It is accompanied by a README providing full instructions for installing this update.
This update can be downloaded from the Equisys website using the following URL.
Other recent updates for Zetafax can be found at http://www.equisys.com/updates/
This behaviour was corrected in the update as documented in this technical note.
Last updated: 7th October 2002 (SV/DH)